- Detail
- Parameters
The central point of the remote control is fixed PWM 1500us (+50 -50), the minimum running distance is 800-1100 and the maximum is 1900-2200 automatically adapted,
There is a power-on prompt (you will hear a "beep" of the motor, indicating power-on)
Start with neutral point (throttle channel 1500, you will hear the motor "beep", the ESC starts)
With runaway protection (loss of signal (in an accident, the signal line is broken), for safety, motor protection, you need to return the throttle to center and unlock again. Bec output 5v 1A to meet your needs for receiving and flight control power supply (Note: Onboard microcontroller It is also 5V power supply <connected with bec>, if you plug the 2S lithium battery <7.4V> directly into the receiver, the microcontroller will burn in seconds <maximum withstand voltage 6.5V>)
Size: 57x20mm
This product is an all-N ESC, which is different from the general P/N ESC, and its structure is more consistent. The same volume current is larger than that of the P/N ESC.
Without overheating protection, please keep ventilated to dissipate heat.
Tested: The current is below 10A, even in the hull, no additional heat dissipation is required, and the ESC comes with an aluminum sheet that is sufficient
In the non-enclosed area, 20A-30A ventilation environment (such as in the car), even if the electric adjustment is hot, there is no need for additional heat dissipation
Size:57*20mm
weight:20g
