40A Brushless ESC for Model Airplane
40A Brushless ESC for Model Airplane
Collection
$5.83
Collection
  • Detail
  • Parameters

Specifications

1.1 Output capacity: continuous current 40A, short-time current 50A (not less than 10 seconds);

1.2 Power input: 2-3 lithium battery packs;

1.3 BEC output: 5V @ 2A (linear voltage regulation mode-linear mode);

1.4 Throttle signal frequency range (Refresh rate): 50Hz-432Hz;

1.5 Maximum speed: 2 pole motor 210,000 rpm, 6 pole motor 70,000 rpm, 12 pole motor 35,000 rpm;

1.6 Size: 70mm (length) * 26mm (width) * 8mm (height);

1.7 Weight: 39g (without plug); soldered T plug and banana head weight 45g


2 Product Features


2.1 Safe power-on function: When the power is turned on, the motor will not start immediately regardless of the position of the throttle stick, to avoid causing personal injury;

2.2 Throttle stroke adjustment function: adapt to the difference of the throttle stroke of different remote controllers and improve the linearity of the throttle response;

2.3 Program setting items (can be set by remote control throttle stick or LED parameter setting card):

● Brake setting: no brake / with brake;

● Battery type: Lithium battery / NiMH;

● Low voltage protection mode: soft shutdown / hard shutdown;

● Low voltage protection threshold: low / medium / high;

● Start-up mode: normal / soft / super-soft start;

● Timing angle: low / medium / high;

● Restore factory default values;

2.4 Comprehensive protection functions:

● Under voltage protection: set by the user through the program, when the battery voltage is lower than the protection threshold, the ESC will automatically reduce the output power;

● Over-voltage protection: The input voltage exceeds the input allowable range. If it is not started, it will automatically protect and issue a rapid “beep” alarm sound at the same time

● Overheating protection: Built-in temperature detection circuit, the output power is automatically reduced when the ESC temperature is too high;

● Remote control signal loss protection: reduce the power after the remote control signal is lost for 1 second, and close the output if there is no remote control signal for 2 seconds


Code
HSM-9042
Weight
40 g
Home
Customer service
shopping cart
ADD TO CART
BUY NOW