- Detail
- Parameters
FRSKY PRO V1
Compatible Receiver for X9D/X9D PLUS Transmitter d8 Mode XJT/DJT/DFT/DHT W/ PPM SBUS CC3D NAZE32 F3 F4
This receiver is compatible with frsky series remote control and high frequency head, with compact structure and only 1 gram, ultra-light and ultra-small PPM SBUS receiver.
With a ground pull distance of 500m and a height of 600m in the air, it is most suitable for small wheelbase and small traversing machines
Supports the flight control of PPM or SBUS interface, such as CC3D NAZE32 F3 F4, etc.
Compatible with frsky X9D remote control (D8 mode), XJT (D8 mode), DJT, DFT, DHT and other high-frequency heads
Distance: 300m +
Analysis rate: 1024
Interface: PPM SBUS output (default shipment SBUS output)
20 v voltage: 5V-20V
Current: 25 ma
Size: 12 * 17 mm
Weight: 1 gram
Delivery list:
1 * FRSKY Pro V1 receiver
1 * plug line of 4P* 1.0mm
Frequency method:
1. X9D remote control selects D8 mode, the receiver presses BIND to power on. At this time, LED is always on, the remote control selects BIND, the receiver led is off, indicating that the frequency is completed, the remote control exits the frequency mode, and the BIND button is released. Electric can be used
2, DJT, DFT high frequency head press the high frequency head button to open the remote control power supply, at this time the high frequency head enters the frequency mode, the receiver presses BIND power on, the LED is extinguished when the frequency is completed, then the remote control restarts, let go BIND button, the receiver can be used to restart
3, XJT high frequency head dip switch select D8 mode, then the frequency mode is the same as above
PPM output mode:
Short the PPM pad on the back of the receiver to a ppm output that can be used to connect to a flight control, or wireless analog, or wireless trainer
SBUS output mode:
Short the SBUS pad on the back of the receiver to the SBUS output
Out of control protection:
At present, only the third channel out-of-control protection is supported, and it is not possible to define it by itself. In any way, mix the channels, keep the throttle channel in the third channel.
