Fly for Fun

Features:
Support four standard micro UAV battery interface, plug and check.
0.36 inches red digital tube display, display battery voltage, battery voltage detection accuracy is accurate to 10mV.
Supporting ports JST (2.54mm), MOLEX (2.0mm), mCPX (1.25mm), MCX (1.25mm). Support lithium battery Li-Fe (3.3/3.65V), Li-Po (3.7/4.20V), Li-Hv (3.8/4.35V).
Four battery interfaces support battery polarity reverse connection protection, four battery interfaces are supported Li-Fe, Li-Po, Li-Hv.
The 4 battery interfaces display the voltage independently, from CH1 to CH4.
Four batteries can be tested simultaneously. When one's voltage is lower than 3v, the interfaces display is off, you can use a higher to electrify, thus the lower one can be fund out.

Specifications:
Item name: 1S LiPo Battery Voltage Checker Tester
Connector: Micro JST 1.25, PH 2.0 Micro Losi and JST
Voltage: Works with regular and HV battery packs
Detection accuracy of voltage: 3.65V ± 0.01V, 4.20V ± 0.01V, 4.35V ± 0.01V
Battery voltage input range: 2.50~4.35V @1Cell Li-Fe, Li-Po, Li-Hv
Dimensions: 73 * 25 * 15mm
Working temperature: -20~75°C
Storage temperature: -25~85°C
Weight: 10g

Package Information:
Package size: About 8 * 6 * 4cm / 3.14 * 2.36 * 1.57in
Package weight: 18g
Poly bag package