- Detail
- Parameters
Download:
http://pan.baidu.com/s/1bokfOjt
Note:
This shop only sells high-frequency head hardware. The software is based on open source firmware and is burned by the shop. Please bear the risk of use.
Overview:
This four-in-one tuner module integrates four radio frequency chips, CC2500, NRF24L01, A7105, and CYRF6936, on one circuit board. It can identify the PPM signal output by the remote control, and then convert it into the corresponding remote control protocol to realize the control of the receiver or the aircraft. The currently supported protocols include: Walkera DEVO, Horizon DSM2, Fuss, Yisky, Resky, Weili, Harbson, Chiyuan, Futaba SFHSS Assan and other agreements.
This tuner can control multiple four-axis, helicopters and fixed wings of different brands more flexibly and conveniently. Due to the continued use of the remote control you are familiar with, the operating feel and flying experience are better.
Working parameters:
Working voltage: 5-9 volts
Working current: <=150mA
Working frequency: 2.4G ISM band
RF power: +22dBm
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Net weight: 32g, with antenna
Operation in the serial mode of the tuner:
Xlite remote control can support multi-protocol tuner by default, and it can be used with the following simple steps:
First install the tuner, turn on the remote control, enter the model setting menu, find the External RF option, then select the MULT mode, and then select the corresponding protocol, so that you can use the tuner.
If the remote control does not have relevant options, your remote control firmware may not include multi-protocol tuner related functions. Please download the latest firmware from the OpenTX official website and upgrade the remote control. When downloading the firmware via Companion, you need to check the multimodule option.
For related information, see:
https://github.com/pascallanger/DIY-Multiprotocol-TX-Module
