F7BT Dual Flight Control 5V 8V Control Dual Camera Support Bluetooth Adjust parameter for FPV
Collection
$23.79
Collection
- Detail
- Parameters
JHEMCU F7BT Dual, using STM32F722RET6 high-performance processor, ICM2689 + MPU6000 dual gyroscope, switch the sensor through CLI command. Integrated OSD, built-in 5V / 2A (internal power supply, receiver, LED, BUZZER and other power supply), 8V / 3A BEC (camera and image transmission mode power supply, its opening and closing can be controlled by USER2), two independent BEC work , Do not interfere with each other, optimized circuit design, high-performance hardware, to further ensure the powerful performance of flight control. Support two camera inputs (VIN1, VI2 are video input interfaces, switch control by USER1, default VIN1 is input signal). The perfect interface definition leaves all available interfaces. In addition, 8P and 6P 1.0MM sockets are designed to facilitate the direct input of plug lines. Built-in 16MB of onboard memory, with a recording rate of 16kHz, record flight data, in order to adjust the parameters to support 32K update frequency. A special socket interface for DJI's sky-end video transmission is reserved with a special plug line. Support Bluetooth online adjust parameter.
Model: JHEMCU F7BT Dual
Main control chip: STM32F722RET6 216MHz
Gyroscope: Dual ICM20689 + MPU6000 dual gyroscope access (SPI)
Barometer: BMP280
OSD chip: AT7456E
Black box: 16MB
LED programming: support
BB sound: support
Input voltage: 2-6S
I2C interface: support
BEC-1: 5V / 2A (internal power supply, power supply for receiver, LED, BUZZER, etc.)
BEC-2: 8V / 3A (camera and image transmission mode power supply, its opening and closing can be controlled by USER2)
Dual camera input: support (VIN1, VIN2 are video input interfaces, switch control by USER1, default VIN1 is input signal)
Serial control port: six channels (UART1, UART2, UART3, UART4, UART5, UART6)
Bluetooth: support (port UART4, baud rate 115200, name JHEMCU)
DJIVTX: Support reserved special socket on the sky side, equipped with special plug line
Flight Control Firmware: Betaflight
Target: JHEF7DUAL.HEX
Conversion of hole position and shock-absorbing ball hole position: 30.5 * 30.5mm, φ4mm
Flight control size: 36 * 36mm
Weight: 7.3g
CLI:
status // Query sensor status
set gyro_to_use = FIRST // ICM20689 switch
set gyro_to_use = SECOND // mpu6000 switch
save // Enter SAVE after finishing the input
Package Included:
1 x JHEMCU F7BT Dual flight controller
Code
HSM-F7BT
Brand
JHEMCU
Weight
9 g
